• Kryefaqja
  • Kuturu
  • Atypari
  • Hyni
  • Contribute
  • Rregullime
  • Dhuroni
  • Rreth Wikipedia-s
  • Shfajësimet
Wikipedia

Stampa:Height

  • Lexojeni në një gjuhë tjetër
  • Mbikëqyre
  • Redakto
Udhëzuesi i stampës[shiko] [redakto] [historiku] [rifresko]
Kjo stampë përdor Lua:
  • Module:Check for unknown parameters

Lëndë

  • 1 Instructions
  • 2 Examples
  • 3 Tracking categories
  • 4 Template data
  • 5 See also

InstructionsRedakto

  • The template is intended for conversion of heights specified in either feet and inches, or metric units (centimetres or metres). Metric units are converted to feet and inches, and feet and inches are converted to metres, or optionally to centimetres.
  • As this template is intended for use in infoboxes, the units on both sides of the conversion are abbreviated by default. When using this template outside of infoboxes, use the abbr parameter, which can take values of yes (default; both sides of the conversion are abbreviated), no (both sides of the conversion are spelled out), or mos (WP:MOSNUM-compliant format, where the units being converted are spelled out and the units of the converted values are abbreviated).
  • For conversion of metric units to feet/inches, the frac parameter can be specified to either show the output inches as decimals (frac=10) or as a vulgar fraction (frac=desired denominator; the default is 2 for halves). The frac parameter is ignored for conversion of feet/inches to metres.
  • When decimal output is used, the default precision is 1 for metres-to-feet/inches conversion and 2 for feet/inches-to-metres conversion, but it can be overridden by specifying a different figure using the precision parameter (see example below). The precision parameter is ignored when frac is set to anything but 10.
  • wiki parameter specifies whether the names of the units should be wikified or not and can take values of either yes or no. The default value is no.
  • Use |out=cm with input values in feet and inches to output the conversion as centimetres.

ExamplesRedakto

Code Result
m
{{height|m=1.77}} Page Stampa:Fraction/styles.css has no content.1.77 m (5 ft 9+1⁄2 in)
{{height|metres=1.77}} Page Stampa:Fraction/styles.css has no content.1.77 m (5 ft 9+1⁄2 in)
{{height|meters=1.77|abbr=no}} Page Stampa:Fraction/styles.css has no content.1.77 metres (5 feet 9+1⁄2 inches)
{{height|m=1.77|abbr=mos}} Page Stampa:Fraction/styles.css has no content.1.77 metres (5 ft 9+1⁄2 in)
{{height|m=1.77|frac=16}} Page Stampa:Fraction/styles.css has no content.1.77 m (5 ft 9+11⁄16 in)
{{height|m=1.77|precision=0}} 1.77 m (5 ft 10 in)
cm
{{height|cm=177}} Page Stampa:Fraction/styles.css has no content.177 cm (5 ft 9+1⁄2 in)
{{height|centimetres=177}} Page Stampa:Fraction/styles.css has no content.177 cm (5 ft 9+1⁄2 in)
{{height|centimeter=177|abbr=no}} Page Stampa:Fraction/styles.css has no content.177 centimetres (5 feet 9+1⁄2 inches)
{{height|cm=177|abbr=mos}} Page Stampa:Fraction/styles.css has no content.177 centimetres (5 ft 9+1⁄2 in)
{{height|cm=177|frac=16}} Page Stampa:Fraction/styles.css has no content.177 cm (5 ft 9+11⁄16 in)
{{height|cm=177|precision=0}} 177 cm (5 ft 10 in)
ft and in
{{height|ft=6|in=1}} 6 ft 1 in (1.85 m)
{{height|ft=6|in=1|out=cm}} 6 ft 1 in (185 cm)
{{height|ft=6|in=1|precision=1}} 6 ft 1 in (1.9 m)
{{height|ft=6|in=1|precision=-1|out=cm}} 6 ft 1 in (190 cm)
{{height|feet=6|inches=1}} 6 ft 1 in (1.85 m)
{{height|feet=6|inches=1|out=cm}} 6 ft 1 in (185 cm)
{{height|ft=6|in=1|abbr=no}} 6 feet 1 inch (1.85 metres)
{{height|ft=6|in=1|abbr=no|out=cm}} 6 feet 1 inch (185 centimetres)
{{height|ft=6|in=1|abbr=mos}} 6 feet 1 inch (1.85 m)
{{height|ft=6|in=1|abbr=mos|out=cm}} 6 feet 1 inch (185 cm)
{{height|ft=5|in=7+1/2}} Page Stampa:Fraction/styles.css has no content.5 ft 7+1⁄2 in (1.71 m)
{{height|ft=5|in=7+1/2|out=cm}} Page Stampa:Fraction/styles.css has no content.5 ft 7+1⁄2 in (171 cm)
{{height|ft=5|in=7+1/2|precision=1}} Page Stampa:Fraction/styles.css has no content.5 ft 7+1⁄2 in (1.7 m)
{{height|ft=5|in=7+1/2|precision=1|out=cm}} Page Stampa:Fraction/styles.css has no content.5 ft 7+1⁄2 in (171.5 cm)
{{height|ft=5|in=7+1/2|precision=-1|out=cm}} Page Stampa:Fraction/styles.css has no content.5 ft 7+1⁄2 in (170 cm)
{{height|ft=5|in=7+1/2|precision=3}} Page Stampa:Fraction/styles.css has no content.5 ft 7+1⁄2 in (1.715 m)
ft
{{height|ft=6}} 6 ft 0 in (1.83 m)
{{height|ft=6|out=cm}} 6 ft 0 in (183 cm)
{{height|ft=6.5}} 6.5 ft 0 in (1.98 m)
{{height|ft=6.5|out=cm}} 6.5 ft 0 in (198 cm)
{{height|ft=6+1/2}} Page Stampa:Fraction/styles.css has no content.6+1⁄2 ft 0 in (1.98 m)
{{height|ft=6+1/2|out=cm}} Page Stampa:Fraction/styles.css has no content.6+1⁄2 ft 0 in (198 cm)
in
{{height|in=10}} 0 ft 10 in (0.25 m)
{{height|in=10|out=cm}} 0 ft 10 in (25 cm)
{{height|in=10.5}} 0 ft 10.5 in (0.27 m)
{{height|in=10.5|out=cm}} 0 ft 10.5 in (27 cm)
{{height|in=10+1/2}} Page Stampa:Fraction/styles.css has no content.0 ft 10+1⁄2 in (0.27 m)
{{height|in=10+1/2|out=cm}} Page Stampa:Fraction/styles.css has no content.0 ft 10+1⁄2 in (27 cm)
errors
{{height|cm=200|in=2|precision=0}} Error: please specify height using only one type of units
{{height|cm=177|frac=0}} 177 cm (5 ft 9.7 in)*
{{height|ft=5|in={{frac|7|1|2}}}} [convert: invalid number]
{{height|ft=5|in={{frac|7|1|2}}}} [convert: invalid number]
{{height|ft=5|in=7 1/2}} [convert: invalid number]
{{height|ft=5|in=7_1/2}} [convert: invalid number]
{{height|ft=5|in=7-1/2}} [convert: invalid number]
{{height|ft=5|in=7½}} [convert: invalid number]
unsupported units
{{height|mm=2000}}
{{height|dm=20}}
{{height|'=6|"=1}}
{{height|′=6|″=1}}
{{height|hand=20}}
{{height|yard=2}}
  • m is for metres
  • cm is for centimetres
  • ft is for feet
  • in is for inches

Tracking categoriesRedakto

  • Kategoria:Pages using height with unknown parameters (0)
  • Kategoria:Pages using height with 1 equal 0 (0)

Template dataRedakto

Këtu janë të dhënat e stampës për këtë stampë që përdoren nga TemplateWizard, VisualEditor dhe vegla të tjera.

Të dhënat e stampës për stampën Height

The template is intended for conversion of heights specified in either metres or in feet and inches.

[Edit template data]

Template parameters

ParameterDescriptionTypeStatus
Metresm metre metres meter meters

The height in metres. Do not use if feet and inches are specified.

Numberoptional
Centimetrescm centimetre centimetres centimeter centimeters

The height in centimetres. Do not use if feet and inches are specified.

Numberoptional
Feetft foot feet

The feet part of the height in feet and inches. Do not use if centimetres are specified.

Numberoptional
Inchesin inch inches

The inches part of the height in feet and inches (optional). Do not use if centimetres are specified. Fractions are supported in the form u+n/d.

Numberoptional
Precision of converted valueprecision

The amount of decimal places to display the converted value to. Defaults to 2 for feet and inches to metres and to 1 for metres/centimetres to feet and inches.

Numberoptional
Fraction denominatorfrac

Shows result as a fraction. The number in this parameter is the denominator of the fraction. Used only for metres/centimetres to feet and inches. Set to "10" for decimals. Defaults to 2 (halves).

Numberoptional
Abbreviation styleabbr

Changes abbreviation style. Set to "yes" for all units to be abbreviated (default), "no" for all to be spelled out, or "mos" for the units being converted to be spelled out and the converted units to be abbreviated.

Stringoptional
Unit linkingwiki

Changes whether units are linked. Set to "no" to not link units (default) or "yes" to link units.

Stringoptional
Output formatout

Changes output format of conversion. Set to "cm" with input values in feet and inches to output the conversion as centimetres. No other options currently exist and the template ignores anything other than "cm".

Stringoptional

See alsoRedakto

  • {{convert}}
    • {{convert|1.82|m|ftin|frac=4|abbr=on}} → Page Stampa:Fraction/styles.css has no content.1.82 m (5 ft 11+3⁄4 in)
    • {{convert|182|cm|ftin|frac=4|abbr=on}} → Page Stampa:Fraction/styles.css has no content.182 cm (5 ft 11+3⁄4 in)
    • {{convert|5|ft|11+3/4|in|m|2|abbr=on}} → Page Stampa:Fraction/styles.css has no content.5 ft 11+3⁄4 in (1.82 m)
    • {{convert|5|ft|11+3/4|in|cm|0|abbr=on}} → Page Stampa:Fraction/styles.css has no content.5 ft 11+3⁄4 in (182 cm)
Udhëzuesi i mësipërm po shfaqet nga Stampa:Height/doc. (redakto | historiku)
Redaktorët mund të eksperimentojnë në faqen e livadhit (krijo | pasqyro) dhe provëzave (krijo) të kësaj stampe.
Ju lutemi t'i shtoni kategoritë në nënfaqen /udhëzuesi. Nënfaqet e kësaj stampe.
Marrë nga "https://sq.wikipedia.org/w/index.php?title=Stampa:Height&oldid=2436962"
Last edited on 3 prill 2022, at 16:08

Languages

    • Afrikaans
    • العربية
    • مصرى
    • অসমীয়া
    • Asturianu
    • अवधी
    • Azərbaycanca
    • تۆرکجه
    • Basa Bali
    • भोजपुरी
    • বাংলা
    • Català
    • کوردی
    • Cymraeg
    • Dansk
    • डोटेली
    • English
    • Español
    • فارسی
    • Føroyskt
    • Français
    • Arpetan
    • ગુજરાતી
    • हिन्दी
    • Հայերեն
    • Bahasa Indonesia
    • Ilokano
    • 日本語
    • Jawa
    • 한국어
    • Kurdî
    • Lingála
    • ລາວ
    • मैथिली
    • Minangkabau
    • Македонски
    • മലയാളം
    • Монгол
    • मराठी
    • Bahasa Melayu
    • မြန်မာဘာသာ
    • नेपाली
    • Norsk bokmål
    • Kapampangan
    • پښتو
    • Português
    • Română
    • संस्कृतम्
    • Scots
    • سنڌي
    • Srpskohrvatski / српскохрватски
    • ၽႃႇသႃႇတႆး
    • සිංහල
    • Simple English
    • Српски / srpski
    • Sunda
    • Svenska
    • தமிழ்
    • తెలుగు
    • Тоҷикӣ
    • ไทย
    • Tagalog
    • Türkçe
    • Українська
    • Oʻzbekcha / ўзбекча
    • Tiếng Việt
    • Winaray
    • 吴语
    • Yorùbá
    • 中文
    • 粵語
    • IsiZulu
    Wikipedia
    • Kjo faqe është redaktuar për herë te fundit më 3 prill 2022, në orën 16:08.
    • Përmbajtja është në disponim nëpërmjet licencës CC BY-SA 3.0 nëse nuk shënohet ndryshe.
    • Rreth të dhënave vetjake
    • Rreth Wikipedia-s
    • Shfajësimet
    • Kushtet e Përdorimit
    • Desktopi
    • Programuesit
    • Statistikat
    • Deklarata e cookies